Multi Purpose Glaze Shellac Varnish

SHEB 5050 a semi synthetic composition has been developed which is based on shellac ,synthetic resin and commonly used solvents.A double coat ( or more ,if required , depending on the substrate) of the varnish on the desired surface after drying gives a visually appealing,glossy finish and lustrous shine resulting in a natural attraction for the viewers.

Aadhya’s Multi Purpose Glazing Varnish is especially developed for on application on a number of surfaces like brass,copper,silver,wood ,mild steel, aluminium ,Tin, leather, rexin, craft or tool items, plaster, plastic gives visually appealing glossy finish and lustrous shine.

Aadhya Multi purpose shiner varnish is fairly resistant towards humidity, water and acid vapour.

ColourClear / Golden/ Amber
Drying Time20 Minutes
FinishGlossy, Smooth, adherent coating
Gloss %
Standard black glass100
Silver coated glass38
Stone>100
Scratch hardness1600g
Flexibility (3mm mandrel)Passes
Viscosity: ( 23°C/73°F)15 - 16 seconds
Operating temperature15 - 30°C (59 - 86°F)
Relative Humidity30 - 80%
Theoretical Coverage: (ready for use unthinned)10 Sqmtr /kg @ 20 µm dry film thickness
Recommended Dry Film Thickness15 - 20 µm
Flash Off TimeNA
Flash PointSHEM 8020 Base Component 22°C
Shelf LifeSHEM 8020 Base Component 24 months in original unopened container
UV resistantPass the test and non yellowing
Water ResistanceNo blushing after continuous immersion for more then 24 hrs
Acid ResistanceNo effect for more then 24 Hrs

Note: Shelf life may vary due to OEM specification requirements. Refer to container label for specific shelf life information.

Note:The application and performance property values above are typical for the material, but not intended for use in specifications or for acceptance inspection criteria because of variations in testing methods, conditions and configurations.

Storage Recommendation

Inspect the condition of the container to ensure compliance. The material should be stored at temperatures between 5°C to 35°C (41°F to 95°F) to ensure shelf life.

Note: When procuring to a qualified material specification, follow those storage instructions

Health Precaution

This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. An SDS is available on request. Avoid overexposure. Obtain medical care in case of extreme overexposure.

For industrial use only. Keep away from children.