Gasket Shellac Compound

Aadhya gasket shellac compound is a hard setting, slow drying liquid designed to coat, seal and repair most gaskets including felt, paper, rubber and composition type gaskets. It seals metal gaskets and threaded connections for light duty service. Aadhya gasket shellac compound is a dark brown, viscous liquid with a characteristic alcoholic odor.

PRODUCT BENEFITS

TYPICAL APPLICATIONS

DIRECTIONS FOR USE

FOR CLEANUP

PROPERTIES OF UNCURED MATERIAL

Chemical TypeResin (shellac)
Appearance Dark brown, viscous liquid
OdorAlcoholic
Specific Gravity0.91
Viscosity( 23°C/73°F)65 - 66 seconds
Flash Point38 °C

GENERAL INFORMATION

This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

STORAGE

Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8_ to 28_C (46_ to 82_F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.

NOTE

The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. Aadhya International specifically disclaims all warranties expressed or implied; including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Aadhya International products and disclaims any liability for consequential or incidental damages of any kind, including lost profits.